The CT416GDs Combines plasma cutting, TIG/stick and arc welding functions in 1 machine. Its ideal for applications where space and budget are limitations. It is a welding machine incorporating IGBT and features performance with high efficiency, and is ideal for hardware, decoration, car modification, equipment maintenance and other household DIY operation. Using any air compressor that puts out 43.5-50.7 psi, you will be able to cut all exotic metals fast, clean, and effectively. With stick you'll be able to weld with 0.063-0.126 diameter electrode up to 1/5. With HF Tig you'll be about to weld up to 0.157. The compact size and relatively light weight is due to its advanced IGBT inverter design. All functions are easily accessible with a flip of the switch, and a changeover of the torches and gas supply. It includes nearly everything you need to get started welding and cutting. Pack include: 1. Cutting torch: Trafimet PT3116ftM161.5; 2.TIG Torch: Trafimet TIG1713ftM161.5; 3.Electrode holder: 5AWGx10 ft. cable10-25quick connector200A electrode holder; 4.Earth clamp: 5AWGx10 ft. cable10-25 quick connector300A earth clamp; 5.Face mask components: SB-17, with hammer brush.
Working voltage: 230 V±15%; Welding range: 20 - 150 A; Duty cycle: 30% of maximum amp
Arc is started by high frequency for TIG and Cut functions, which is known for producing more reliable, consistent and cleaner cuts/welds without having to spend extra time on cleaning
Heat start and built-thrust under stick function, helping deliver better control and give you a smoother action when welding
2T/4T modes is useful if you have a long cut or weld to do, as it saves you having to hold the trigger down the whole time
Compact IGBT inverter design with automatic overheat and over current welding protection Portable hand carry machine weighs 21.39 lbs.