2018 Everlast PowerTIG 325EXT 320amp DIGITAL AC DC TIG STICK Inverter AC/DC 220 Volt

Price: $2,799.00
Product prices and availability are accurate as of 2018-04-26 15:57:54 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

The PowerTIG 325EXT is built for superior industrial performance. With Digital microprocessor control over the IGBT inverter, and up to 325 amps of TIG welding Power, the PowerTIG 325EXT packs considerable punch. The IGBT module inverter design creates a reliable and serviceable platform designed for years of service. The unit is equipped with many features that improve its value in the shop. One of the features that is highly useful is the Advanced Pulse in AC which can greatly increase penetration while welding aluminum, and make it seem like you are welding with a lot larger machine than you are. Wave form control, AC frequency and AC balance control combine to round out the welder into a very capable Aluminum welder. However, the DC capabilities should not be overlooked either with plenty of features which includes a standard pulse frequency up to 500 Hz, and a wide range of adjustable 2T/4T functions. The standard PowerTig 325 EXT requires1 or 3 phase 240V input and is available in 3 phase 480V input as well. 12.5 ft Everlast 20 Series TIG torch with 35 DINSE style connectors and torch switch for 2T/4T operation 12.5 ft Everlast 9 Series TIG torch with 35 DINSE style connectors and torch switch for 2T/4T operation New style stick electrode holder with 10ft cable and 35 series DINSE style connectors Heavy Duty Work clamp with 10 ft Cable and DINSE style connectors New, redesigned compact foot pecal New Everlast Regulator made from billet brass Consumable starter kit (Tungsten not included) 6 ft Power input cable Weld steel to a maximum of 1/2" single pass Weld steel to a maximum of 1+" multi-pass Weld aluminum to a maximum of 1/2" single pass Weld aluminum to a maximum of 1+" multi-pass Weld to a minimum of .005" Steel Weld to a minimum of .010" Aluminum Weld with a minimum of 1/16" diameter electrode Weld with a maximum of 3/16" diameter electrode

Product Features

Digital microprocessor control Operation down to 5 Amps DC and 10 amps AC Pulse up to 500Hz in DC, 250 Hz AC 10Hz Advanced AC Pulse mode improves penetration on thicker metals, and can reduce warping and burn through on thinner metals

Write a Review