Desoldering Wick, Desoldering Pump Wick

Price: $10.99
Product prices and availability are accurate as of 2018-12-12 02:10:39 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Suck the Solder Away Easily

Which will fit your hands perfectly no matter if you are left-handed or right-handed. With metal body and high pressure vacuum, this desoldering pump can help you suck the solder away effectively.

Package Included:

1* Desodering Pump

1* Desodering Pump Nozzle Tip

1* Desoldering Wick 1.5Mx 2.0mm/3.5mm

1* Solder Wire

How to Use the Desoldering Pump

Step 1: Press the plunger down until it is been locked and you will hear a click;

Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid;

Step 3: Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pump's tip. Pull the trigger;

Step 4: Repeat this process if necessary.

How to Use the Solder Wick

Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;

Step 2: Remove the wick once the solder has been absorbed;

Step 3: Cut off the used part of the wick;

Step 4: Repeat this process if needed.

Product Features

One-handed Desoldering Pump with Powerful Suction - Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome. Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use. No Clean Solder Wick Braid Removal Tool - 1pcs desoldering vacuum pumps and 2pcs solder braid, 1pcs solder wire, 1pcs replacement tip. This solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas. Widely used Solder Remover - The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.

Write a Review