The Maniac 161 Automatic Primary Select operates on either 115 or 230 VAC and also will immediately set up to the primary input provided; Fixed hot begin - enables the operator to easily strike an arc without the electrode adhering to the plate; Fixed arc pressure - enables the operator to get further infiltration into the plate without the electrode adhering to the plate; Lift arc tag offers you the high-end of lifting the tungsten as opposed to traditional scratch starting which can transfer tungsten into the plate leading to contamination; Able to use cellulosic 6010 electrodes with ease; 18 Extra pound weight - Makes this system mobile and also very easy to lug straight to the work; Comes with shoulder band; Consists of 10 ft. work cable with clamp, 10 ft. welding cable with electrode holder; Thermal indicator avoids the maker from becoming harmed if air flow is blocked or from surpassing the task cycle; Easy user interface - amperage knob, stick/TIG button and also on/off turn on front panel of system; Little and also mobile, inverter based; 5 to 160 Amps present variety for DC Welding.
The MiniArc 161 Automatic Primary Select operates on either 115 or 230 VAC and will automatically configure to the primary input supplied
Fixed hot start - allows the operator to easily strike an arc without the electrode sticking to the plate
Fixed arc force - allows the operator to get deeper penetration into the plate without the electrode sticking to the plate
Lift arc tag gives you the luxury of lifting the tungsten
Able to use cellulosic 6010 electrodes with ease