185 Amp MIG/TIG Torch/Stick/Arc Combo Welder, Weld Aluminum(MIG) 110/230V Dual Voltage Welding New

Price: $549.00
Product prices and availability are accurate as of 2019-05-19 18:24:20 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.

Manufacturer Description

AMICO POWER MTS-185, 3-IN-1 MIG/TIG/STICK Arc Combination Welding Machine, Very Easy to bond 3/8" Light weight aluminum. MTS-185 is the best option for projects and also repair services around the home and also vehicle body store. This welder can function well with solid wire and also change wire along with aluminum wire. It additionally has the TIG and also STICK feature, can bond steel and also stainless-steel perfectly. The welder output range 10-185 amp. It makes use of conventional flux-core wire(E71-gs) or steel wire 0.6-0.9 mm, and also aluminum wire. It has settings to easily adjust the output according to the density and also changing the polarity according to the sort of wires. Specs: Welder Kind: 3-IN-1 MIG/TIG/STICK Combination Welder, Result Terminal Kind: Direct Cord, Power Supply: AC 100V-240V/ Single Phase/50 -60 Hz, Effective Input Current: 115V: 29.5 A(MIG)/ 19.3 A(TIG)/ 32.4 A(STICK); 230V: 23.3 A(MIG)/ 14.3 A(TIG)/ 22.9 A(STICK), Optimum Input Current: 115V: 38.0 A(MIG)/ 24.9 A(TIG)/ 41.8 A(STICK); 230V: 30.0 A(MIG)/ 18.4 A(TIG)/ 29.6 A(STICK). Present Variety Result: MIG: 115V/50A -140 A, 230V/50A -185 A; TIG: 115V/10A -120 A, 230V/10A -160 A; STICK: 115V/10A -120 A, 230V/10A -160 A. Nominal DC Open Circuit Voltage (OCV): 56V, Welding Result,104 F(40C),10 minutes(230V): MIG: 185A/23.2 V, TIG: 160A/16.4 V, STICK: 160A/26.4 V. Responsibility Cycle: MIG: 60% at 185A, 100% at 143A, TIG: 60% at 160A, 100% at 123A, STICK: 60% at 160A 100% at 123A. Package Consists of: 13 ft. 200A MIG weapon and also cable television assembly, 13 ft. 200A TIG torch weapon and also cable television assembly, 10 ft. 500A electrode holder and also cable television assembly, 10 ft. 630A job clamp and also cable television assembly, 120V/240V power adapter, 8 feet air hose use for Co2 and also Argon attach, 1 spool 2 lbs. aluminum wire use for MIG bonded, 1 spool 2 lbs. steel wire use for MIG bonded, 2 pcs tungsten Needle use for TIG weld, 4 pcs electrode use for Stick Arc weld, 1 U-drive roll for 0.030" & 0.035" (0.8 mm/0.9 mm), 1 V-drive roll for 0.023" & 0.030" (0.6 mm/0.8 mm), Quick handbook & Owners Handbook.

Product Features

MTS-185 capable of welding up to 3/8" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function. Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles. Synergic controlled, very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending. Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, automatic control gas solenoid valve has been installed inside the machine. Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.

Write a Review