AMICO Power 3-IN-1 MIG/TIG/STICK Arc Combo Welding Machine, Very Easy to bond 1/4" Aluminum, MTS-165 is the excellent selection for tasks and also repair work around the home and also automobile body shop. This welder can work well with strong cable and also change cable as well as aluminum cable. It also has the TIG and also STICK function, can bond steel and also stainless-steel completely. The welder result range 10-165 amp. It utilizes basic flux-core cable(E71-gs) or steel cable 0.6-0.9 mm, and also aluminum cable. It has setups to conveniently readjust the result according to the thickness and also altering the polarity according to the kind of cords. Requirements: Welder Type: 3-IN-1 MIG/TIG/STICK Combo Welder, Output Terminal Type: Direct Wire, Power Supply: Air Conditioner 100V-240V/ Solitary Phase/50 -60 Hz. Efficient Input Current: 115V: 28.9 A(MIG)/ 17.2 A(TIG)/ 29.1 A(STICK); 230V: 19.8 A(MIG)/ 11.9 A(TIG)/ 19.5 A(STICK). Maximum Input Current:115 V: 37.3 A(MIG)/ 22.2 A(TIG)/ 37.6 A(STICK); 230V: 25.6 A(MIG)/ 15.3 A(TIG)/ 25.1 A(STICK). Current RangeOutput: MIG:115 V/50A -130 A, 230V/50A -165 A; TIG: 115V/10A -110 A, 230V/10A -140 A; STICK: 115V/10A -110 A, 230V/10A -140 A. Nominal DC Open Circuit Voltage (OCV): 56V, Welding Output,104 F(40C),10 min(230V): MIG: 165A/22.2 V, TIG: 140A/15.6 V, STICK: 140A/25.6 V. Obligation Cycle: MIG: 60% at 165A, 100% at 128A; TIG: 60% at 140A, 100% at 108A; STICK: 60% at 140A, 100% at 108A. Effectiveness:93%, Power factor:0.85, Cooling Technique: Fan Cooled. Consists of:13 ft200Apro. MIG gunand cable setting up, 13 feet 200Apro. TIG Torch gun and also cable setting up, 10 feet 300Aelectrode holder and also cable setting up, 10 feet 500A job clamp and also cable setting up, 110V/240V power plug adapter, 8 feet airline usage for CARBON DIOXIDE and also Argon connect, 1 spool 2 lbs. aluminum cable usage for MIG weld, 1 spool 2 lbs. steel cable usage for MIG weld, 2 pcs tungsten Needle usage for TIG weld, 4pcs electrode usage for Stick Arc weld, 1 U-drive roll for 0.030" & 0.035" (0.8 mm/0.9 mm), 1 V-drive roll for 0.023" & 0.030" (0.6 mm/0.8 mm), Quick manual & Owner's Guidebook.
MTS-165 multifunction 3-in-1 MIG/TIG/Stick Arc professional combo welder, capable of welding up to 1/4" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function, can weld steel and stainless steel perfectly.
Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
Synergic controlled, it has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. Very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine.
Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.