AMICO Power 3-IN-1 MIG/TIG/STICK Arc Combination Welding Device, Really Easy to bond 1/2" Aluminum.MTS-205is the best option for tasks as well as repair services around the house as well as auto body store. This welder can function well with solid cable as well as flux cable in addition to aluminum cable. It also has the TIG as well as STICK feature, can bond steel as well as stainless steel flawlessly. The welder output variety 10-205 amp. It utilizes standard flux-core cable(E71-gs) or steel cable 0.6-1.0 mm, as well as aluminum cable. It has settings to quickly change the output according to the density as well as altering the polarity according to the kind of cables. Requirements: Welder Kind: 3-IN-1 MIG/TIG/STICK Combination Welder, Output Terminal Kind: Direct Cable, Power Supply: AC 100V-240V/ Single Phase/50 -60 Hz, Reliable Input Current: 115V: 35.0 A(MIG)/ 21.5 A(TIG)/ 35.7 A(STICK), 230V: 27.0 A(MIG)/ 15.5 A(TIG)/ 24.8 A(STICK), Maximum Input Current:115 V: 45.2 A(MIG)/ 27.7 A(TIG)/ 46.0 A(STICK), 230V: 34.8 A(MIG)/ 20.0 A(TIG)/ 32.0 A(STICK), Present RangeOutput: MIG:115 V/50A -150 A, 230V/50A -205 A; TIG: 115V/10A -130 A, 230V/10A -170 A; STICK: 115V/10A -130 A, 230V/10A -170 A. Nominal DC Open Circuit Voltage (OCV): 56V, Welding Output,104 F(40C),10 minutes(230V): MIG: 205A/24.2 V, TIG: 170A/16.8 V, STICK: 170A/26.8 V. Responsibility Cycle: MIG: 60% at 205A, 100% at 158A; TIG: 60% at 170A, 100% at 132A; STICK: 60% at 170A 100% at 132A. Effectiveness: 93%, Power element: 0.85, Cooling Down Approach: Fan Cooled. Consists of:13 ft. 250A pro. MIG weapon as well as cord assembly, 13 ft. 250A pro. TIG Lantern weapon as well as cord assembly, 10 ft. 500A electrode holder as well as cord assembly, 10 ft. 630A job clamp as well as cord assembly, 120V/240V power plug adapter, 8 feet air hose usage for CARBON DIOXIDE as well as Argon connect, 1 spool 2 pounds. aluminum cable usage for MIG weld, 1 spool 2 pounds. steel cable usage for MIG weld, 2 tungsten Needle usage for TIG weld, 4 electrodes make use of for Stick/Arc Weld, 1 V-drive roll for 0.023" & 0.030" (0.6 mm & 0.8 mm), 1 U-drive roll for 0.030" & 0.035" (0.8 mm & 0.9 mm), 1 V-drive roll for 0.035" & 0.040" (0.9 mm & 1.0 mm).
MTS-205 multifunction 3-in-1 MIG/TIG/Stick Arc professional combo welder, capable of welding up to 1/2" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron.It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function, can weld steel and stainless steel perfectly.
Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
Synergic controlled, it has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires. Very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine.
Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.