Amtech Tf-nc-559-v2

Price: Click Button for Price
Product prices and availability are accurate as of 2019-06-17 02:15:14 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

AMTECH NC-559-V2-TF no-clean gaudy solder change (ROL0) USA

Product Features

Optimal viscosity - 40-52 (Malcom @ 10 RPM/25°C (x103mPa/s)). High temperature compatible (up to 300°C/600°F). Surface insulation resistant. No copper mirror breakthrough. Low electrochemical migration (<1 decade drop). May contain up to 7% w/w of ethoxylated 4-nonylphenol (NPE can be harmful to aquatic organisms - dispose of responsibly avoiding water drains) Activated residue is clear and non-corrosive - can be left on board for multiple SMT assemblies (manufacturer recommends cleaning all flux residues at all times to avoid board contamination or voltage leakage on circuits with high impedance, also non-activated residue may absorb moisture from the air and subsequently cause corrosion). Wide process window - excellent performance on Flip Chip bumping and Chip Scale Packaging sites. Syringes are intended for industrial dispensing machines and use a piston stopper instead of a plunger - do not remove the piston as it delivers the best seal to prevent contact with air. Dispensing Kit is a third party add-on, not supplied by AMTECH. A plunger is to push on the piston and not necessary snuggly fitting AMTECH syringe, a plunger can be loose. Dispensing tip gauge (size) will be within 14-23 Ga and may differ from pictured. Genuine product made in the USA by Inventec Performance Chemicals. Distributed by AMTECH DIRECT - every original shipment will include AMTECH Soldering Profiles card. ROL0 flux classification - rosin based, low activity no-clean tacky solder flux for professional/industrial use. Highly praised by advanced reworks community for mighty long-lasting action and easy cleaning - clear residue evaporates with hot air and doesn't short components. Applicable for a syringe, stencil printing, rework, BGA sphere attachment and reballing using standard tin/lead alloys (won't solder lead-free metals). Halide-free (<0.05%). Contains UV-tracer for fast detection of splatter

Write a Review