AMICO Power 3-IN-1 MIG/TIG/STICK Arc Combination Welding Maker, Extremely Easy to bond 1/2" Light weight aluminum. MTS-205 is the ideal selection for projects and fixings around the residence and auto body shop. This welder can work well with strong wire and flux wire as well as light weight aluminum wire. It likewise has the TIG and STICK function, can bond steel and stainless-steel flawlessly. The welder outcome array 10-205 amp. It utilizes typical flux-core wire(E71-gs) or steel wire 0.6-1.0 mm, and light weight aluminum wire. It has setups to conveniently adjust the outcome according to the density and altering the polarity according to the kind of cords. Specifications: Welder Type: 3-IN-1 MIG/TIG/STICK Combination Welder, Result Terminal Type: Direct Cord, Power Supply: AC 100V-240V/ Single Phase/50 -60 Hz, Efficient Input Current: 115V: 35.0 A(MIG)/ 21.5 A(TIG)/ 35.7 A(STICK), 230V: 27.0 A(MIG)/ 15.5 A(TIG)/ 24.8 A(STICK), Optimum Input Current: 115V: 45.2 A(MIG)/ 27.7 A(TIG)/ 46.0 A(STICK), 230V: 34.8 A(MIG)/ 20.0 A(TIG)/ 32.0 A(STICK), Present Range Result: MIG: 115V/50A -150 A, 230V/50A -205 A; TIG: 115V/10A -130 A, 230V/10A -170 A; STICK: 115V/10A -130 A, 230V/10A -170 A. Nominal DC Open Circuit Voltage (OCV): 56V, Welding Result,104 F(40C),10 min(230V): MIG: 205A/24.2 V, TIG: 170A/16.8 V, STICK: 170A/26.8 V. Duty Cycle: MIG: 60% at 205A, 100% at 158A; TIG: 60% at 170A, 100% at 132A; STICK: 60% at 170A 100% at 132A. Plan Includes: 13 ft. 250A pro. MIG weapon and wire assembly, 13 ft. 250A pro. TIG Lantern weapon and wire assembly, 10 ft. 500A electrode owner and wire assembly, 10 ft. 630A work clamp and wire assembly, 120V/240V power plug adapter, 8 feet air hose use for CARBON DIOXIDE and Argon connect, 1 spindle 2 lbs. light weight aluminum wire use for MIG weld, 1 spindle 2 lbs. steel wire use for MIG weld, 2 tungsten Needle use for TIG weld, 4 electrodes use for Stick/Arc Weld, 1 V-drive roll for 0.023" & 0.030" (0.6 mm & 0.8 mm), 1 U-drive roll for 0.030" & 0.035" (0.8 mm & 0.9 mm), 1 V-drive roll for 0.035" & 0.040" (0.9 mm & 1.0 mm), Owners Manual.
MTS-205 capable of welding up to 1/2" aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function.
Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles.
Synergic controlled, very clear wire melting droplet transfer, very few spatters. fast, precise, clean arc ignition and arc ending.
Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. automatic control gas solenoid valve has been installed inside the machine.
Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control.