SPARC regulator/ circulation meter combos. Great for MIG and TIG welding. * CGA580 Container Inlet Link - Fits typical argon, helium, nitrogen, and argon/CO2 style gas bottles from any type of supplier * Adjustable outcome circulation is from 0 to 60 cfh (cubic feet per hour) at a pre-programmed 50psi, and is indicated by a round which goes up and down in the circulation tube, so this flowmeter will handle MIG and TIG welding both steel and light weight aluminum. * Outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It likewise features a basic 1/4" barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas tube from your machine must screw right in, as they must use the 5/8" x 18 male nut. * There are NO GASKETS or WASHING MACHINES to get the installations to seal like various other less expensive regulatory authorities sold right here on Amazon.com that do not use the typical N-24 nut and NP-72 electrical outlet nipples. * The pressure scale which shows how much gas is left in the storage tank goes from 0 to 4000 psi. This flowmeter does not use a diaphragm, so it is more trustworthy than the flow-gauge style regulatory authorities. Bundle Consists Of: (1) Flow Meter (1) Set of adapter installations. 2 year service warranty versus making flaws. We are located in Denver, CO and provide customer service and assistance by means of phone which can be located on our web site.
CGA580 Bottle Connection for argon and argon blend bottles
Outlets - female 9/16" x 18 nut or 5/"8 UNF-18RH - 1/4" Hose Barb Adapter Included
1 Year Warranty
0-4000psi Pressure Gauge for monitoring bottle pressure
Great for Miller, Lincoln, Hobart, HTP, and most other welders!